BŁOTNIKI PRZEDNIE (P+L) NISSAN S15

Zajmujemy się produkcją lekkich części nadwozia do samochodów osobowych. Kilkunastoletnie doświadczenie w produkcji laminatów zapewnia wysoką jakość wykonania.

Z naszych produktów korzystają zawodnicy uczestniczący w różnych odmianach samochodowego motorsportu, w tym czołowi zawodnicy driftingowi.

Chcąc sprostać najwyższym wymaganiom nieustannie udoskonalamy nasze produkty, oraz wdrażamy produkcję elementów dla nowych modeli aut. 

Posiadamy szeroką ofertę, w której znajdziesz: lekkie zestawy nadwozia, zderzaki, błotniki, maski, drzwi, klapy, konsole, spoilery i dodatki do aut, przeznaczonych do DRIFTU, RAJDÓW, RALLYCROSSU i OFFROADU. W celu uzyskania szczegółowych informacji zapraszamy do kontaktu.

Informacje dotyczące bezpieczeństwa

INSTRUCTIONS FOR USE AND SAFETY INFORMATION

Manufacturer: Mikinka-Projekt.com
Address: Koszalińska 54, 76-100 Sławno
Phone: +48 690 938 408
Email: mikinkaprojekt@gmail.com
Website: https://mikinka-projekt.com/

1. INTRODUCTION

Thank you for choosing our Mikinka-Projekt.com products.

Our motorsport parts have been designed with precision, durability, and safety in mind. To familiarize yourself with the features, please read the user manual.

2. PRODUCT INFORMATION
Our products are made exclusively from certified materials that meet European standards.

3. PRECAUTIONS

3.1 General Safety Rules

1. Assembly should only be performed by a qualified person or in a workshop accessible to motorsports.
2. Ensure the work area is clean, well-lit, and has a safe area.
3. Always properly secure the vehicle against movement.
4. Avoid working in unfavorable operating conditions (e.g., rain) that may affect the assembly and safety module.

3.2 Safety During Work

1. Always use tools and personal protective equipment, such as:
- protective gloves - to protect the gaps from cuts and burns,
- safety glasses - to protect the eyes from debris and the vacuum cleaner.
2. Avoid working on the vehicle's chassis without solid supports (e.g., hydraulic lifts with relays).
3. Before performing work, ensure that vehicle components, such as the engine or exhaust system, are completely cooled.

4. WARNINGS

1. If any of the following occurs, such as deformation or cracking, discontinue use immediately and replace the product with the next one.
2. This product is intended only for commercial vehicles with its mounting specifications. Use on other vehicles may be dangerous.
3. Modification of the product is strictly prohibited – its remains may be stored for safety, security, and your own access.
4. This product should only be used for its intended purpose, in commercial vehicles for use on enclosed facilities such as racetracks.
5. Improper use of the product may result in consequences such as mechanical failures, accidents, or damage to the vehicle.

5. INSTRUCTIONS FOR USE

1. Intended use of the product:
• The product was intended for motorsport use only. It is intended for use on enclosed facilities such as racetracks, training areas, or other areas with limited public access.

• Using the product for purposes other than its intended use, such as on public roads, may pose a safety risk and violate regulations.
2. Instructions for use:
• Before each use, inspect the product's technical condition, paying particular attention to any damage, deformation, or signs of use.
• The product should only be used in vehicles with its technical specifications.
• Any modifications to the product are prohibited and may result in a loss of signal and a safety impairment.
3. Product use:
• The product may only be used in conditions that have occurred, such as track racing, drifting, training, and testing in closed facilities.
• Do not use the product in extreme conditions (e.g., in mud, in water, or on uneven surfaces) unless it is designed for such use. 4. Safety of Use:
• If any abnormalities occur, such as assembly, noise, or loose switches, discontinue use immediately and close the door.
• Your safety and the safety of other participants in sporting events depends on the proper use of the product for its intended purpose.

6. MAINTENANCE AND USE

1. Regularly inspect the product's technical condition, especially after use.
2. If necessary, discontinue use immediately.
3. Clean the product with mild detergents and avoid harsh chemicals that may be present on external surfaces.
4. Regularly check that all connections are properly tightened.

7. WARRANTY

The warranty for Mikinka-Projekt.com products is 12 months and covers materials and manufacturing defects.
2. The warranty does not cover:
- damage to the mounting device,
- use of the product on public roads,
- modification or alteration by the user.

8. FINAL WARNINGS

1. This product is not homologated and cannot be used on public roads. It is intended only for use on enclosed facilities such as racetracks.
2. Regularly inspect the product, especially during intensive use. If any irregularities are detected, discontinue use immediately.
3. Any modifications to the product are made at your own risk and may void the warranty.

9. ASSEMBLY INSTRUCTIONS

9.1 Preparing for assembly:

1. Ensure that all components are included and that there is no visible damage.
2. Prepare the work area – it should be clean, well-lit, and ensure the vehicle's stability.
3. Secure the vehicle against movement using wedges or supports.

9.2 Tools and Accessories:

1. Use only tools that meet the product specifications,
2. Prepare appropriate wrenches for precise tightening of screws,
3. Secure mounting hardware according to the manufacturer's instructions.

9.3 Assembly Process:

1. Disassembly of Existing Components (if applicable):
• Carefully remove old parts to be replaced,
• Carefully inspect mounting locations for rust and cleanliness.

2. Installing New Components:
• Position the product and ensure it is properly aligned with the mounting points,
• Tighten all screws securely, observing the torque specifications in the technical documentation.

3. Post-Assembly Inspection:
• Check all connections and ensure there are no gaps,
• Visually inspect to ensure the product is properly installed.

9.4 Testing

1. Test under controlled conditions to ensure the product is functioning properly. 2. After a short test drive, recheck all connections to ensure nothing has come loose.

10. CONTACT THE MANUFACTURER
For any questions regarding installation, use, or technical issues, please contact:
Paweł Mikinka Mikinka-Projekt.com
Address: Koszalińska 54, 76-100 Sławno
Phone: +48 690 938 408
Email: mikinkaprojekt@gmail.com
Website: https://mikinka-projekt.com/

NOTE:
This product is not road-legal, meaning it cannot be used on public roads. It was designed for use in enclosed spaces, such as racetracks or other sports facilities. Any modifications are made at your own risk.